skip to Main Content
Metallic Expansion Joints On Towers Of Furnaces

Metallic expansion joints on towers of furnaces

  • 10/05/2021

Metallic expansion joints through which hot dust circulates from the exchange tower of a furnace. Manufactured in carbon steel with a detachable inner sleeve of great thickness in refractory stainless steel.

¿What Is The Difference Between A Bellows And An Expansion Joint?

¿What is the difference between a bellows and an expansion joint?

  • 11/02/2021

In this area, terminology can be confusing, often with no universally accepted meaning. We tend to use the following definitions, but the terms "bellows" and "expansion joint" are often considered interchangeable: Expansion joint: an expansion joint is a complete unit…

Merry Christmas And Happy New Year

Merry Christmas and happy new year

  • 30/12/2020

In this difficult year for everybody, the Codinor team especially wants to convey to you all the support and strength we need at this time, to wish you with all affection, that you have a good happy holiday season and…

Elaflex ERV-GS Rubber Expansion Joints

Elaflex ERV-GS rubber expansion joints

  • 02/09/2020

Our rubber expansion joints absorb thermal expansion, reduce vibration and noise. Our type ERV-GS is flame resistance so it is suitable for the installation in ship engine rooms, approved to the “Marine Equipment Directive”. Download the brochure.

What Is The Difference Between A Bellows And An Expansion Joint?

What is the difference between a bellows and an expansion joint?

  • 15/07/2020

The terms can be confusing since there is no universally accepted meaning. We usually use the following definitions, but the terms "bellows" and "expansion joint" are generally considered interchangeable: Expansion joint: An expansion joint is a complete unit with metal,…

What Information Do We Need To Design Or Select A Metal Expansion Joint?

What information do we need to design or select a metal expansion joint?

  • 28/05/2020

To design or select a metallic expansion joint, we need to know: nominal diameter, type of ends/connections, service, temperature, pressure and required movements. Besides, the requirements for external elements/accessories can also be specified: tie rods, hinges, gimbals, internal lining, external…

Design And Manufacture Of Bellows For Atmos Pendulum Clock

Design and manufacture of bellows for Atmos pendulum clock

  • 15/05/2020

Codinor has designed and manufactured some bellows in austenitic stainless steel and 3” diameter used for the famous Atmos pendulum clock. Atmos is the brand name of a mechanical torsion pendulum clock manufactured by Jaeger-LeCoultre in Switzerland which does not…

What do I need to know to identify an existing expansion joint?

  • 14/05/2020

To identify an existing expansion joint, we need to know the following: nominal diameter, total length and type of connections, in addition to the application and conditions, temperature, pressure, fluid and movements required if known. To help identify the expansion…

Lens Expansion Joint

Lens expansion joint

  • 14/05/2020

Lens expansion joint made of Aisi-316L with a thickness of 6mm. This expansion joint has been manufactured for a 1000mm diameter duct with chemical process gas circulation.

Back To Top